UNS N07718-INCONEL 718

UNS N07718-INCONEL 718 2020-09-18T17:27:22+00:00

MATERIALS-studbolts,hex bolts,hex cap screw , hex nuts, fasteners INCONEL® alloy 718 (UNS N07718/W.Nr. 2.4668)

INCONEL® alloy 718 (UNS N07718/W.Nr. 2.4668) is a high-strength, corrosion-resistant nickel chromium material used at -423° to 1300°F good tensile, fatigue, creep, and rupture strength
Applications:
liquid fueled rockets, rings, casings and various formed sheet metal parts for aircraft and land-based gas turbine engines, and cryogenic tankage,fasteners and instrumentation parts.

Two heat treatments are generally used for INCONEL alloy 718:

  • Solution anneal at 1700-1850°F followed by rapid cooling, usually in water, plus precipitation hardening at 1325°F for 8
    hours, furnace cool to 1150°F, hold at 1150°F for a total aging time of 18 hours, followed by air cooling.
  • Solution anneal at 1900-1950°F followed by rapid cooling, usually in water, plus precipitation hardening at 1400°F for 10 hours, furnace cool to 1200°F, hold at 1200°F for a total aging time of 20 hours, followed by air cooling.
    If the material is to be machined, formed, or welded, it typically is purchased in the mill annealed or stress relieved condition. The material is then fabricated in its most malleable condition.
    After fabrication, it can be heat treated as required per the applicable specification.
DOWNLOAD TECHNICAL SHEET
DOWNLOAD TECHNICAL SHEET